That's not a hanger, that's part of the derailleur.
You cannot just replace the "hanger". Good news is that derailleur is only like $15.
If it bends again, I'd recommend replacing it.
Yeah but I rode it home. Then I took it apart because I remembered i couldn't get into 6th ever. Then once I put it vack together I noticed the derailer hitting the spokes at low gears. So was not sure if I did a bad job of putting it back on or it was actually bent (this I doubted becuase I rode it back home seemingly fine).
That's not a hanger, that's part of the derailleur. You cannot just replace the "hanger". Good news is that derailleur is only like $15. If it bends again, I'd recommend replacing it.
The only correct answer her.
Yup. It is strongly bent.
so your bike fell on its side and it looks bent and you’re asking if it’s bent
Yeah but I rode it home. Then I took it apart because I remembered i couldn't get into 6th ever. Then once I put it vack together I noticed the derailer hitting the spokes at low gears. So was not sure if I did a bad job of putting it back on or it was actually bent (this I doubted becuase I rode it back home seemingly fine).
Yes. Remove it, clamp the hanger in a vise, bend it back. Then reinstall.
???????? 👁️👄👁️
Is my carpet a carpet? Sometimes dude, you just don’t need to ask. Lol
Thanks everyone for the help and I see now it is obvious. I ended up bending it back and it works fine now.
Bent derailleur hanger is bent. Unbend and call in the morning.
Bent af
Don’t lay your bike on the drive side
On top of all other advice, you don't seem to have an actual hanger.
No, it’s the perspective tilt from your camera.
Yeah. The bent thing is the derailleur hangar.
Very.